Description Of The Appliance; Switching The Appliance On And Selecting The Temperature; Automatic Shutdown - Imetec G0002 Manual Del Usuario

Wash at 40°C max with a delicate
cycle
Drying in tumble dryer with program at
EN
moderate temperature
Do not tumble-dry
Temperature selector
STAND-BY
Refer to the Illustrative guide on page to verify your appliance equipment.
1. Inner lining
2. Outer lining
3. Control
wArNING! Do NoT use this appliance if there are visible
signs of damage.
wArNING! Use the appliance while sitting down.

SwITCHING THE APPLIANCE oN AND SELECTING THE TEmPErATUrE

• Press the ON/OFF (7) selector to switch the footwarmer.
• The temperature display (4) will light up and the temperature will be automatically set to
position 5 (MAX).
• Select the desired temperature, from 1 (min.) to 5 (max.) by pressing the temperature
selector (6) until the relative number lights up on the temperature display (4).

AUTomATIC SHUTDowN

• The footwarmer is provided with an automatic shutdown system. The stand-by display (5)
lights up after 3 operating hours to indicate that the product has switched off automatically.
• Switch the appliance back on by pressing the ON/OFF selector (7) and select the desired
temperature once again.
SwITCH-oFF
• Switch the footwarmer off after use by pressing the ON/OFF selector (7).
• Remove the plug from the socket.
10

DESCrIPTIoN oF THE APPLIANCE

4. Temperature display
5. Stand-by Display
6. Temperature selector
Do not bleach
Do not dry-clean
Do not wash
ON/OFF selector
7.
USE
ON/OFF selector