Rational MI-2112 Manual De Instalación página 5

5. Remove the safety clips and bolts on the underside of the lifting cylinder. (4)
6. Remove the lifting cylinder from the unit.
>>
The lifting cylinder has been removed.
Installing the lifting cylinder lid
1. Proceed in reverse order to install.
In order to fasten both bolts, the lifting cylinder must first be placed in the
corresponding position.
Attach the safety clips and bolts on the underside of the lifting cylinder
n
and attach the connector to the lifting cylinder.
Switch the unit on.
n
Activate the lifting cylinder and place it in the appropriate position.
n
Turn off the unit.
n
The bolt at the top can now be attached.
n
MI_2112_Removal_and_Installation_Lifting_Cylinder_Lid_S
1 | MI_2112: Removing and installing the lifting cylinder lid
NOTICE
3 4
5 / 84