Adjusting Equalizer Curves; Adjusting Loudness; Front Image Enhancer (Fie) - Pioneer DEH-1430R Manual De Instrucciones

Audio Adjustments

Adjusting equalizer curves

You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in
1 Press to select the equalizer mode.
AUDIO
Press until
AUDIO EQ-L/EQ-M/EQ-H
the display.
2 Select the band you want to adjust with
2/3.
—
EQ-L (low) EQ-M (mid)
3 Press 5 or ∞ to adjust the equalizer curve.
Each press of 5 or ∞ increases or decreases
the equalizer curve respectively.
• – is displayed as the equalizer curve is
+6 –6
increased or decreased.
• The actual range of the adjustments are differ-
ent depending on which equalizer curve is
selected.
Note
• If you make adjustments when a curve other
than is selected, the newly adjusted
CUSTOM
curve will replace the previous curve. Then a
new curve with
CUSTOM
play while selecting the equalizer curve.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press to select
AUDIO
Press until
AUDIO LOUD
.
CUSTOM
appears in
—
EQ-H (high)
appears on the dis-
.
LOUD
appears in the display.
on or off with 5/∞.
2 Select
LOUD
3 Select the desired level with 2/3.
—
LOW (low) MID (mid)
Note
• You can also switch
LOUD
ing the .
LOUDNESS

Front image enhancer (FIE)

The F.I.E. (Front Image Enhancer) function is a
simple method of enhancing front imaging by
cutting mid- and high-range frequency output
from the rear speakers, limiting their output to
low-range frequencies. You can select the fre-
quency you want to cut.
Precaution
• When the F.I.E. function is deactivated, the
rear speakers output sound of all frequencies,
not just bass sounds. Reduce the volume
before disengaging F.I.E. to prevent a sudden
increase in volume.
1 Press to select
AUDIO
Press until appears in the display.
AUDIO FIE
on or off with 5/∞.
2 Select
FIE
3 Select the desired frequency with 2/3.
— —
100 160 250 (Hz)
Notes
• After switching the F.I.E. function ON, select
the Fader/Balance mode in the Audio Menu,
and adjust front and rear speaker volume
levels until they are balanced.
• Switch the F.I.E. function OFF when using a 2-
speaker system.
—
HI (high)
on or off by press-
.
FIE
En
14