30 OPERATION
NOTE
• Too much detergent can leave a film on dishes
and in the dishwasher, resulting in poor wash
performance.
• Do not use detergent tablets for shorter wash
cycles. The tablet may not dissolve completely,
causing detergent residue on dishes and
inefficient cleaning. Using a wash booster
helps remove spots, residue, and the white film
caused by hard water. It does not help remove
excess detergent residue.
CAUTION
Detergent Information
Use only detergent intended for automatic
dishwashers. Incorrect detergent may cause the
dishwasher to fill with suds during operation.
Excess suds may reduce wash performance and
may cause the dishwasher to leak. DO NOT use
hand dishwashing detergent in this dishwasher.
Adding Rinse Aid to the Dispenser
The Low Rinse Aid indicator appears in the display
when more rinse aid is needed.
The use of rinse aid is recommended to prevent water
spots on dishes and to enhance drying performance.
NOTE
• Only use liquid rinse aid in the dishwasher.
1
Push the button to open the lid.
2
Add a liquid rinse aid to the maximum fill level.
When filling the rinse aid dispenser, aim the
rinse aid at the arrow. Make sure that the rinse
aid is settled in the dispenser while filling.
3
Close the lid to lock the dispenser. Rinse aid is
dispensed automatically during the final rinse
cycle.
Rinse Aid Dispenser Adjustment
The rinse aid dispenser is set to level 4, which
provides the best performance under most conditions.
Adjust the setting higher if you have hard water and
notice calcium buildup on your dishes.
If you notice a film on your dishes, use a lower setting.
Setting the rinse aid control too low will contribute
to spotting and streaking on dishes and poor drying
performance. Setting the control too high can cause
foaming, which will cause poor wash performance. To
adjust the rinse aid dispenser setting, remove the cap
and adjust the rinse aid lever to the desired setting.
Point the arrow to the left for a lower setting, and to
the right for a higher setting.
Refilling the Rinse Aid
How often the dispenser needs to be refilled depends
on how often dishes are washed and the rinse aid
setting used. If the rinse aid level is low, the Rinse Aid
light on the control panel illuminates.
Rinse Aid Filling Tips:
• The Low Rinse Aid indicator appears in the display
when more rinse aid is needed.
• Do not overfill the rinse aid dispenser.
• Clean up any spilled rinse aid to prevent suds.
Rinse-aid indicator
Adjust lever (Rinse)