Q:
What is Child Lock and how is it activated?
A:
Child Lock is a feature that prevents the controls from being changed during the cycle. It does not
prevent the door from being opened or the unit from being powered off. To activate or deactivate,
press Spray and Rinse simultaneously for 3 seconds.
Q:
Why is PF showing up on the display?
A:
PF is not an error code indicating a malfunction. PF indicates that there was a power failure. This
function protects the dishwasher in the event that the power goes out or the power to the unit is
disrupted. When power is returned and a button is pushed, this will display for 10 seconds and then
go away.
Q:
Can I add an extension to the drain hose?
A:
If an extension drain hose is required, use
for connecting the two hose ends.
Q:
Before loading dishes, should I pre-rinse dishes?
A:
No you don't need to pre-rinse the dishes before loading especially if using the Normal and Auto
cycles. The dishwasher washes dishes clean without pre-rinsing.
/
" or
/
" inside diameter, 2-3 ft. length hose and a coupler
5
7
8
8
TROUBLESHOOTING
39