Cleaning The Top Spray Arm; Seasonal Maintenance And Storage; Clogged Drain Air Gap Or In-Sink Disposal - Signature UPDF9904ST Características Detalladas Del Producto

36 MAINTENANCE

Cleaning the Top Spray Arm

1
Make sure that the water jet holes are not
blocked by food particles. When cleaning is
necessary, use a screwdriver to release the
retainer clip from the bracket that holds the top
spray arm assembly to the tub.
2
Pull the spray arm out.
3
Remove food particles by rinsing or shaking the
spray arm.
4
After cleaning the top spray arm, replace it. Slide
it back into place and make sure the retainer clip
engages.
Seasonal Maintenance and
Storage
• If you will be absent for an extended period of
time during warmer months, close the water valve
and unplug the power cord, or turn off the circuit
breaker. Clean the filter, tub and dispenser to
prevent odor.
• If you will be absent for an extended period of time
during colder months and there is a possibility of
freezing temperatures, winterize the water supply
lines and the dishwasher itself. Winterization must
be performed by experienced service personnel.
Clogged Drain Air Gap or
In-Sink Disposal
Check the drain air gap or in-sink disposal if the
dishwasher is not draining well.
Cleaning the Air Gap
1
Turn off the dishwasher.
2
Remove the air gap cover and the plastic cap
underneath it.
3
Clean out any debris with a toothpick or brush.
4
Replace the plastic cap and air gap cover.
NOTE
• The drain air gap and disposal are external
plumbing devices that are not part of the
dishwasher.
• The warranty provided with the dishwasher
does not cover service costs directly associated
with the cleaning or repair of the external drain
air gap and disposal.