Error Codes - Signature UPDF9904ST Características Detalladas Del Producto

42 TROUBLESHOOTING
Problem
Yellow or brown film
on inside surfaces of
dishwasher.
Dishes don't dry.
Lamps do not
illuminate.
Sprays arms do not
rotate smoothly.
Upper rack is crooked.
Dishwasher
continuously beeps
when the door is
opened, during or
right after a cycle has
completed.

Error Codes

Problem
IE Error
OE Error
FE Error
E1 or AE Error
HE Error
tE Error
LE Error
nE Error
Possible Cause
Coffee or tea stains.
Rinse agent dispenser empty.
Power is not connected.
Holes of spray arms are blocked
by food particles.
Rack is poorly adjusted.
The contents of the dishwasher
are hot and care should be used
when placing your hands inside
the dishwasher.
Possible Cause
Water inlet problem.
Drainage Problem.
Air gap or disposer is clogged.
Filters are clogged.
Excessive Water supplied.
Water leakage problem.
Heater circuit failure.
Thermistor failure or very high
inlet water temperature
(over 194 °F)
Motor trouble
Vario motor trouble
Solutions
• Eliminate the stain by using a stain
removal product.
• Check and refill the rinse agent
dispenser if empty.
• Connect power supply.
• Clean the holes of spray arms.
• See the Height Adjustable Upper Rack
section.
• Close the door until the dishwasher and
dishes have cooled down. The beeping
will stop if the door is closed or the
interior temperature has cooled.
Solutions
• Check for a clogged, kinked or frozen
water inlet hose.
• Check water supply.
• Check for a clogged, kinked or frozen
drain hose.
• Clean air gap or disposer.
• Clean Filters.
• Please call an Authorized Service
Center or SIGNATURE KITCHEN
SUITE Sercive at 1-855-790-6655.