Intended Use; Safety Informations - BGS technic 65631 Manual De Instrucciones

Repair Set for Glow Plug Threads, 33 pcs.

INTENDED USE

This tool set is made for repairing glow plug threads in cylinder head and the included tools are
suitable for M8x1.0 - M10x1.0 - M10x1.25 - M12x1.25 glow plug threads.
CONTENTS
1. Guide Pins
2. Mounting Bolts (2pcs.), M8x1, 0 - M10x1, 0 / M10x1, 25 - M12x1, 25
3. Centering Piece (3pcs.)
4. Disc
5. Taps M8x1.0, for re-cutting the original thread
6. Taps M10x1.0, receiving thread / original thread
7. Taps M10x1.25, receiving thread / original thread
8. Taps M12x1.0, receiving thread / original thread
9. Taps M12x1.25, receiving thread / original thread
10. Taps M14x1.25, for cutting the receiving thread
11. Threaded inserts (5pcs.), inside M8x1.0 / outside (M10x1.0)
12. Threaded inserts (5pcs.), inside M10x1.0 / outside (M12x1.0)
13. Threaded inserts (5pcs.), inside M10x1.25 / outside (M12x1.25)
14. Threaded inserts (5pcs.), inside M12x1.25 / outside (M14x1.25)

SAFETY INFORMATIONS

•
Wear eye protection, especially when blow-out with compressed air.
•
Make sure that the tool is properly mounted.
•
Do not use excessive force, the tools can be damaged.
•
Lubricate the tap before / during use.
•
Check and replace any damaged tools.
•
Be careful when working on running engines. Loose clothes, tools and other objects can be detected
by rotating parts and cause serious injury.
•
Remove the ignition key before you start your repair job to avoid unintentional starting of the engine.
•
These instructions are intended as an overview only and can by no means substitute a workshop
manual. Always use car-specific repair manuals to look up information such as torque values,
disassembly/assembly instructions , etc.
•
Keep children and unauthorized persons away from the working area.
•
Do not allow children to play with these tools or its packaging.
•
Ensure the working area has adequate lighting
•
Keep working area clean and tidy, dry and free from unrelated materials.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 65631
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed