Sennheiser NoiseGard HMEC 25-6A Instrucciones Para El Uso página 8

HMEC 25-6A
™
Turning NoiseGard ON/OFF
™
With the NoiseGard active noise compensation turned off, the headset can be
used as a conventional headset.
Turn on the NoiseGard ™ active noise compensation by setting the ON/OFF switch
to ON.
Mono/Stereo selection
In general, you'll receive a mono sound source so that the Mono/Stereo switch can
remain set to 'Mono'. When using a stereo intercom system, set the Mono/Stereo
switch to 'Stereo'.
14
HMEC 25-KAP-2
Cable (Worn on left or right side)
350°
Cable on the left
Note:
™
NoiseGard reduces noise and increases comfort.
™
NoiseGard is not a medical noise protection system!
NoiseGard ™ cannot replace an industrial ear defender system for use in noisy
environments!
Volume up? - No !
When people use headphones, they tend to choose a higher volume than with
loudspeakers. Listening with high volume levels for a longer time can lead to
permanent hearing defects. Because the
ambient noise, the headphones can be set at a correspondingly lower level leading
to more comfortable hearing conditions so protecting your hearing.
Cable on the right
circuitry is reducing the
NoiseGard ™
15