Setting A Schedule; Confi Guring The Product; Mowing Parameters; Advanced Settings - Ryobi ROBOYAGI 800 Traducción De Las Instrucciones Originales

SETTING A SCHEDULE

Use the schedule to set the day and time for the
mowing operation.
1. Choose the day, then press the confi rm button.
2. Choose the time.
a. Mark the start time.
b. Press the confi rm button to set start time.
c. Mark the end time.
d. Press the confi rm button to set end time.
e. With [Save and Continue] highlighted, press the
confi rm button to continue.
NOTE: Highlight [Copy] to apply the same schedule
to the other days. Highlight the day that will have the
same schedule. Repeat the step to apply the same
schedule to the other days.
3. On the daily schedule screen, fi nalize the settings.
●
[Edit]: Edit the displayed schedule.
●
[ON], [OFF]: Activate or deactivate trimming
action.
With [Confi rm] highlighted, press the confi rm button
to save the schedule.
4. An overview of your schedule appears. Press the
confi rm button to save settings.
NOTE: A top bar indicates a trimming action on a
certain schedule.
CONFIGURING THE PRODUCT
Choose [ ] to confi gure the following settings:
●

Mowing Parameters

●

Advanced Settings

●
Perimeter Test Run
MOWING PARAMETERS
1. From the [Settings] screen, choose [Mowing
Parameters]. A list of mower settings appears.
2. Update the following mower settings:
●
[Cut Height]: Sets the distance between the
blade disc and the levelled ground surface. The
cut height setting is from H1 (20 mm) to H9 (60
mm) in 5 mm increments.
●
[Docking Direction]: Sets the direction of the
mower when docking towards the charging
station.
●
[Back Up Distance]: Sets how far the mower
backs up after hitting an obstacle. The mower
will turn at a specifi ed exit angle once the
maximum back-up distance is reached.
●
[Exit Angle Range]: Sets the maximum angle
of rotation before the mower starts to move
forward.
16
3. Press the back button to return to the [Mowing
Parameters] menu.
ADVANCED SETTINGS
1. From the [Settings] screen, choose [Advanced
Settings]. A list of system settings appears.
●
[Security PIN]: Allows the user to change the
pre-set security PIN.
●
[Language]: Allows the user to change the pre-
set language option.
●
[Perimeter Trimmer]: Enables or disables the
perimeter trimmer option. This setting must be
enabled if the user wants to use the installed
perimeter trimmer assembly.
●
[Wi-Fi]: Allows the user to reconfi gure the pre-
set Wi-Fi setting.
●
[Date/Time]: Allows the user to change the date
and time settings.
●
[Product info.]: Allows the user to view the
product specifi c information.
●
[Factory Reset]: Allows the user to perform
a factory reset. After a factory reset, the user
must perform the "Setting up for fi rst-time use"
process without the security PIN setup.
2. Press the back button to return to the [Advanced
Settings] menu.
CHANGING SECURITY PIN
1. From the [Advanced Settings] screen, choose
[Security PIN].
2. Press the confi rm button to continue.
3. Enter your current PIN. Press the confi rm button.
Repeat the step to choose the succeeding digits of
your security PIN.
4. Enter your new PIN. Press the confi rm button.
Repeat the step to choose the succeeding digits of
your security PIN.
5. Re-enter your new PIN. Press the confi rm button.
Repeat the step to choose the succeeding digits of
your security PIN.
6. If the security PIN setup is successful, a confi rmation
screen appears.
7. Press the confi rm button to return to the [Settings]
menu.
WI-FI SETUP
1. From the [Wi-Fi Setup] screen, choose [YES].
2. Press the confi rm button to continue.
3. Select one of the following:
●
[Setup via the app]: Set up the Wi-Fi connection
using the app.
●
[Setup Wi-Fi here]: Set up the Wi-Fi connection
using the control panel.