Kit Assembly; Iso Head Unit Provision With Pocket - Metra 99-6504 Manual Del Usuario

ISO head unit provision
1. Attach the ISO brackets to the radio
housing by sliding the bracket tabs into
the housing slots. (Figure A)
2. Slide the aftermarket head unit into the
radio housing.
3. Align the holes in the head unit with the
holes in the ISO brackets and mount
the head unit to the brackets with (4)
screws supplied with the unit.
(Figure B)
4. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order
of disassembly.

Kit Assembly 99-6504

with pocket
15
(Figure A)
(Figure B)