Incorrect Operation - Yale Tigrip TCP Manual Del Usuario

12
I O
NCORRECT PERATION
(list not complete)
Do not exceed the rated load capacity (WLL) of the unit.
Only loads within the specified jaw capacity must be picked up.
The trench shield grab must never be used for pulling trench shields out of the ground.
Any modifications of the load lifting attachment are prohibited.
It is forbidden to use the load lifting attachment for the transportation of persons.
When transporting loads ensure that the load does not swing or come into contact with other
objects.
Only one trench shield may be transported at a time with the load lifting attachment.
It is forbidden to apply lateral tensile forces to the load lifting attachment.
The unit itself must never be used as a means for attaching ropes, chains or belts.
The latching pin must be pushed completely through the trench shield to be transported and
into the guide opening on the opposite side of the grab.
The load lifting attachment must not be guided on the unlatching lever when loaded. The
transported trench shield could be disengaged!
Do not allow the load lifting attachment to fall from a large height.
The unit must not be used in potentially explosive atmospheres.
©
2016 Columbus McKinnon Industrial Products GmbH