ProMed tens 1000 s Instrucciones De Empleo página 35

o
PeratInG the unIt
Resetting the timer: To restart treatment or reset the timer, simp-
ly switch the intensity regulator (B) into the OFF position, then back
to the ON position.
Mode functions: Burst mode (B) triggers two individual bursts
per second. In this mode, the pulse frequency is set at 100 Hz per
second, while the pulse width is adjustable. In continuous stimulati-
on mode (C), impulses are transmitted continuously at the selected
settings for intensity, pulse frequency and pulse width. In modulation
mode (M), the pulse width set by the user is reduced by 60 %. This
lower pulse width is maintained for 2 seconds before returning to
the original user setting, which is then maintained for 3.5 seconds.
The cycle is then repeated. Intensity and pulse frequency are adju-
stable by the user.
s , C u e
eLeCtIon are anD se oF LeCtroDes
Your doctor should decide which type of electrode is best suited
to your treatment. To achieve optimum stimulation results and avo-
id skin irritation, follow the procedures described in the instructions
supplied with the electrodes. The electrode package will include tips
and information on care and maintenance and the correct storage
of your electrodes.
Using electrodes
Please make sure that the tens 1000 s is switched off when
connecting or removing electrodes.
Positioning the electrodes
Please refer to the operating instructions for the tens 1000 s
electrodes included with the package. To ensure that TENS therapy
remains effective for a long time, you should replace the TENS
electrodes regularly. The skin to be treated should be clean and free
of grease.
Handling electrodes
After use, the electrodes must be put back on the protective foil
to ensure that they continue to function effectively. If the adhesive
properties of the electrode start to deteriorate after being used many
times, you may use a contact gel, which you can remove with
a cloth after use. It is necessary to replace the electrodes after a
maximum of 30 uses.
For hygienic reasons, each patient should use their own set
of electrodes.
35
DE
EN
FR
IT
ES
NL
PL
RU
TR
AR