Fermax iLOFT Manual De Instalador Y Usuario página 45

VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit
PROGRAMMING THE iLOFT MONITOR
The monitor will not function until it has been programmed.
Option 1: From Panel + Monitor
1
1º. With the monitor connected, press the programming button «PROG
seconds (to access this, you must lift up the front cover). A confirmation tone will sound.
2º. Press the call-to-residence button. Again a confirmation is made with a different call
tone.
Note: The time between steps 1 and 2 must be less than 2 and half minutes.
Option 2: From the Monitor You can program the monitor via the on-screen menu.
1º. Enter in the User menu. Press «Menu» 1 second.
1
¸
1"
2 seg.
< 2 min 30 sec.
Note: If the monitor is not yet programmed, press
MENU
2

User Menu
«Menu» for 1 second, and directly access the
«ADMINISTRATOR Menu», see the next page.
(*)
Function available depending on model.
» for 2
(*)
Pag 11