Technical Features; Advanced Programming - Fermax iLOFT Manual De Instalador Y Usuario

VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit

TECHNICAL FEATURES

Power Supply
Consumption
on standby
with video
with audio and video
IP43
Operating temperature
Audio power from the apartment to the panel
Audio power from the panel to the apartment
Adjustable volume both ways
Power Supply
Consumption
standby
video
audio + video
Operating Temperature
Humidity
OSD Menu
Resolution
TFT 3.5"
Composed signal 1 Vpp 75 Ω, 7 Mhz.
Video signal
Flush mounted Dimensions
Surface Dimensions
(Height x Width x Depth)
Lock-Release Activation Time
ADVANCED PROGRAMMING: Lock-Release Timing
There are two programmable lock-release activation times:
- Lock-release time set from the residence.
- Lock-release time set from the exit button (connected to the "BS" and "-" terminals).
Carry out the following steps:
1.- With the power supply disconnected, short circuit the "Bs" and "-" (negative) amplifier
terminals (or press the exit button where one exists).
2.- Maintaining the short-circuit induced above connect the system's power supply (at this
point it will no longer be necessary to maintain the short circuit or hold down the exit
button).
A confirmation tone will sound once you enter programming mode.
3.- Following the confirmation tone, the lock-release time as currently programmed
from the residence will be indicated by way of a number of beeps at 0.5 second
intervals.
[5 , +40 °C]
[41, +104 ºF]
Hor.: 480 Line TV
Ver.: 234 Line TV
197 x 131 x 60 mm / 7,7" x 5,1" x 2,3"
197 x 131 x 34,3 mm / 7,7" x 5,1" x 1,3"
18 Vdc
57 mA
180 mA
390 mA
[-10 , +60 °C]
[14, 140ºF]
1 W
0,15 W
18 Vdc
26 mA
160 mA
250 mA
[5,95%]
Pag 25