Iloft Monitor - Fermax iLOFT Manual De Instalador Y Usuario

VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit

iLOFT MONITOR

Led
Buttons
Buttons
Audio Activation, Call Hang-Up and Configuration Settings Button (menu).
· Upon receiving a call,
During this time the red led light will turn off, informing you that a call is pending),
this button to talk to the visitor. The audio channel is opened from street entrance
to residence,
and everything said will be heard by it)
· Press after finishing the communication,
turns off and the red light is turned on).
Note: The default internal timer for the monitor is 90 seconds.
· With the monitor on standby, press and hold this button for 1 second to go into
User configuration mode. See the «Programming: User Menu» section
Notes:
- The conversation is private, no other terminal can hear it.
- «Hands free» mode is default mode.
- While the audio channel is open the input audio can be adjusted. See the
corresponding chapter on: «Audio Adjustments»
- If the monitor is configured to «simplex mode», (press to speak and release to
listen), it is indicated with a flashing blue led light, activating the input audio
channel. From this moment on, each time you press the MENU key, the output
audio channel is activated (constant blue led light) and when releasing it it
activates the input audio channel (blue flashing led light). To end a conversation,
short-press the MENU key.
Pag 28
(you have 30" to respond before it returns to standby mode.
(the blue led lights up indicating a conversation with the street entrance,
, this is in hands-free operating mode.
(when finished the blue led light again
press