Water Filtration - Krups KM 8005 Manual Del Usuario

English
1 - Adjusting the Time
• Set the clock time by pressing the « h » and « min » buttons (p). To switch between "AM/PM" and
24 hour mode press simultaneously on the "h" and "min" buttons.
2 - Auto-On setting
• The machine must be in stand by mode, i.e. power on and default time is displayed.
• Press the Program button (o) once, « program » is displayed steady and "19:99" blinks on display (l).
• Press the « H » and « min » buttons (p) to set a time for the machine to brew automatically.
• Press the Program button (o) when done. If no button are pressed for several seconds the programmed
start time will be accepted automatically and the display will return to stand by mode showing the real
time clock. (Fig. 6)
After programming the automatic start time as described above, be sure to prepare the machine for a brew
cycle with water in the tank, coffee in the brew basket and carafe securely in place.
Press Auto-On button (n), the machine will brew automatically at the desired time. You can check preset time
by pressing the Program button (o). The program will need to be activated when needed again.
By pressing the Program button(o) for more than 2s, in real clock time, you can disable the Auto-On by
hitting the Auto-On button.
3 - Auto-Off setting
• Press the Program button (o) twice, "keep warm" is displayed steady and "2:00" blinks on display (l).
(Fig 5)
• Use the "H" and "min" buttons (p) to change between 0H30 and 3H00 by steps of 1H00 and 0H30
respectively.".
• Press the Program button (o) when done.
For thermal jug models, the coffee machine will stop automatically.
•

WATER FILTRATION

• Krups DuoFilter water filtration system:
Vegetable based carbon and resin components provide double acting anti-chlorine and anti-scale
filtration. These properties combine to protect the most delicate flavours in your coffee as well as
protecting the machineʼs brewing system from the harmful effects of scale. Please review the section on
descaling on page 5.
Note: the rotary indicator (i) on the top of the water filter holder (j) can be used as a reminder to change the
water filter. Turn the indicator to the month the filter should be changed, referring to the chart below.
Example: if you install a new DuoFilter (k) in January (1) you should set the indicator (k) to March (3) or May
(5), depending on the hardness of your local water supply: position the number 3 or 5 opposite the index
mark.
Water type
Soft water
Hard water
Important:
• The DuoFilter (k) must only be used with water.
• The coffee machine still functions if the water filter is not in place.
• If the coffee machine has not been used for more than one month, rinse the
DuoFilter (k) under running water.
• It is recommended not to leave the DuoFilter (k) in place for more than 5 months.
4
Uses
about 120
about 80
Replace Duo Filter every :
4 months
2 months