Lifetime 60336 Instrucciones De Ensamblaje página 49

Caseta exterior
Tabla de contenido

Publicidad

SECTION 7 (CONTINUED) /
TOOLS AND HARDWARE REQUIRED /
AIW (x1)
7.6
• Insert the two left-most tabs at the bottom of the corner panel (AGY) into the two right-most slots
along the front, right edge of the fl oor. The bushings were installed at the front edge of the fl oor in step 6.4.
• Insérer les deux languettes gauches au bord inférieur du panneau angulaire (AGY) dans les deux
rainures droites le long du bord avant droit du plancher. Les bagues ont été installées au bord avant du
plancher dans l'étape 6.4.
• Insertar las lengüetas al borde inferior del panel angular (AGY) en las ranuras a lo largo del borde
delantero derecho del piso. Se installaron los casquillos al borde delantero del piso en el paso 6.4.
Bushing /
Bague
7.7
• Slide the Panel to the left. If
necessary, use the wood block (AIW) as a
buffer and tap the wall panel over with
a rubber mallet.
• Faire glisser le panneaux à gauche.
Si besoin, employer le bloc en bois
(AIW) comme un buffer et frapper le
panneau mural avec un maillet en
caoutchouc.
• Deslizar el panel a la izquierda. Si es
necesario, utiliser el bloque de madera
(AIW) como un buffer et taper el panel
mural con un mazo de goma.
AIW
SECCIÓN 7 (CONTINUACIÓN)
INSTRUMENTAL Y HERRAJE REQUERIDOS
/
Casquillo
7.8
/
SECTION 7 (SUITE)
/
OUTILS ET QUINCAILLERIE REQUIS
Bushing /
• Bend the corner panel and snap the remaining tabs in place.
To help with insertion, place the wood block (AIW) under the fl oor panel
directly under the tab being inserted. You should hear a "click" when
the tab pops into place. Repeat this step with the second tab.
• Plier le panneau angulaire et insérez les autres languettes. Pour
aider avec le montage, mettre le bloque en bois (AIW) sous le panneau de
plancher directement sous la languette à insérer. Répéter ce processus
avec la deuxième languette.
• Doblar el panel angular e insertar las lengüetas
restantes. Para ayudar con el armado, deslizar el bloque de
madera (AIW) debajo el panel de piso directamente debajo
la lengüeta a insertar. Se escucha un «clic» cuando la
lengüeta se sienta en su lugar. Repetir este proceso con la
segunda lengüeta.
AIW
49
Bague
/
Casquillo
AGY

Publicidad

Tabla de contenido
loading

Tabla de contenido