Assembly And Operation - Worx WG505E Manual Original

OPERATION
INTENDED USE:
The blower & Vac is intended for residential use only. Use the blower outdoors to move or
vacuum yard debris as needed.

ASSEMBLY AND OPERATION

Blow mode
Assembling the Blower/ Vacumm Tube
Attaching the Extension Cord
Starting & Stopping
Using the Blower
Adjusting the Blowing Speed
Vaccumming
Attaching the Leaf Collection Bag
Attaching the Extension Cord
Starting & Stopping
Using the Vacuum
12
Emptying the Leaf Collection Bag
Removing Clogged Debris from the Impeller(no tool included)
STORAGE
Store the Blower/Vacuum and extension cord indoors, in a cool dry location, out of reach of
children and animals.
TROUBLE SHOOTING
Problems
The Blower/Vac does
not operate.
The Blower/Vac
jammed or clogged.
All-in-One Blower/Vac/Mulcher
ACTION
Possible Causes
The Blower/Vacuum Tube is not
attached to the Motor Housing.
Power cord is not connected to the
power source.
Debris blocking in the Impeller
Debris blocking in the Blower/
Vacuum Tube or the connection of the
Leaf Collection Bag.
FIGURE
See Fig. A & B1 & B2
See Fig. C1 & C2
See Fig. E1 & E2
See Fig. G1 & G2 & G3
See Fig. C1 & C2
See Fig. H1 & H2
See Fig. I1 & I2 & I3
See Fig. J1 & J2
Corrective Action
Attach the Blower/ Vacuum
Tube to the Motor Housing.
Connect the power cord to a
power source.
Remove clogged debris from
the Impeller.
Remove clogged debris from
the Blower /Vacuum Tube or
the connection of the Leaf
Collection Bag.
See Fig. D
See Fig. F
See Fig. D
EN