Maintenance And Storage - Worx WG518E Manual De Instrucciones

working on the machine.
m) Avoid using the machine in bad
weather conditions especially
when there is a risk of lightning.

4) Maintenance and storage

a) Keep all nuts, bolts and screws
tight to be sure the appliance is
in safe working condition;
b) Replace worn or damaged
parts.
c) Use only genuine replacement
parts and accessories.
d) Store the machine in a dry
place out of the reach of
children.
e) When the machine is stopped
for servicing, inspection,
or storage, or to change an
accessory, shut off the power
source, disconnect the machine
8
from the supply and make sure
that all moving parts are come
to a complete stop. Allow the
machine to cool before making
any inspections, adjustments,
etc. Maintain the machine with
care and keep it clean.
f) Store the machine in a dry
place out of the reach of
children.
g) Always allow the machine to
cool before storing.
h) Never attempt to override the
interlocked feature of the guard.
5) Recommendation
The machine should be
supplied via a residual current
device (RCD) with a tripping
current of not more than 30mA.
Electric Blower
SYMBOLS
Read the operator's manual.
Wear eye protection
Wear ear protection
Double insulation
Disconnect the mains plug if the cord
becomes damaged or entangled
SWITCH OFF: Remove plug
from mains before cleaning or
maintenance.
Keep bystanders away
Warning of hazard
Do not expose to rain
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
EN