Selecting Pushbutton Led Illumination Mode; Illumination Modes; Procedure For Changing Illumination Mode; Warning Signals - Gaggia Ruby Manual De Instrucciones

Selecting Pushbutton LED Illumination Mode

6.

6.1 Illumination modes

We can choose between 3 different illumination modes for the product selection pushbuttons on the Electronic versions.
a. LED MODE 1
By default, all of the pushbuttons are unlit.
When we press a button that key lights up
and the others remain unlit.
b. LED MODE 2
By default, all the pushbuttons are
illuminated. When a button is pressed, it
remains illuminated and the others turn off.
c. LED MODE 3
By default, all pushbuttons are illuminated.
When a pushbutton is pressed, it will turn off
and the others will remain illuminated.
6.2 Procedure for changing the illumination mode
With the machine turned off, simultaneously press the one-coffee and continuous coffee pushbuttons. Without releasing the buttons,
press the mains power switch and wait for all three lights to begin blinking, indicating that you have entered into the illumination
selection mode.
Press the one-coffee pushbutton to select "Mode1".

Press the continuous coffee pushbutton to select "Mode2".

 Press the two-coffee pushbutton to select "Mode3".
Alarm and Indication Signals
7.
Boiler Refilling Indicator
Flowmeter Alarm
No Water in the internal tank
Boiler Water Level Alarm
Electronic
24
21
Semiautomatic
Boiler Heating Element On