Replace The Scraper; Replace The Impeller - GreenWorks GWSN20130 Manual Del Operador

8.2

REPLACE THE SCRAPER

25
1
25
WARNING
Use only approved replacement scrapers.
WARNING
Wear heavy gloves or wind cloth around the impeller when
you touch the impeller.
1. Remove the screws(25) from each side plate.
2. Remove and discard the old scraper.
3. Install the new scraper.
4. Put in the mounting screw (26) and spacers and tighten
them.
8.3

REPLACE THE IMPELLER

WARNING
Use only approved replacement scrapers.
1. Remove the 5 screws and side wear pad that secure the
right side cover.
English
2. Remove the nut.
26
3. Remove the 5 screws and side wear pad that secure the
4. Remove the belt.
11
left side cover.
EN