SSS Siedle SK 600-0 Manual De Instrucciones página 7

9e IP interface SK 600-...
Enter and test the network settings
of the panel. If the panel is in a dif-
ferent network, the gateway address
must be entered. Under Change IP
settings, it is possible to modify the
settings in the panel.
9f Screen savers
Activate/deactivate, set own
images, file format *.bmp with
100 x 100 pixel, 24 bit colour depth.
9g Startlogo
Activate/deactivate, set own
images, file format *.bmp with
479 x 317 pixel, 24 bit colour depth.
9h Factory setting
All settings are reset to the default
settings.
10 Buttons
Function selection of buttons 1 - 4
under the selected main language,
text display can be adjusted indi-
vidually for each language. In the
event of more than one language,
button 1 is omitted.
11 Call lists
For all call logs, the same informa-
tion is required, although these
differ in terms of their depiction and
grouping. Images displayed in the
event of calls require the file format
*.jpg with 470 x 300 pixel.
Name list
Names are displayed in alphabetical
order. If the number of names is
greater than 50 (default value), the
display switches over to alphabetical
order.
Direct call
A maximum of 3 direct calls can be
configured. The name entered here
is displayed after a completed call.
VIP List
Names are displayed unsorted as
entered under "Search for VIP".
Names in the second column are dis-
played after a completed call. Entries
in the VIP list are always visible.
12 Events
Texts for display after confirmation
of the door release button. These
are permanently defined.
13 Menu
Configuration of the menu structure,
showing important points.
Import Excel file
Here, call logs can be imported.
After opening, the parameters for
import must be defined.
Facility Mode
If the Facility Mode is active, only
the name list can be edited and
transferred.
Template Excel list
Opens an empty excel file for import
of the name lists. After storing and
closing the Excel file, this can be
imported.
7