Philips HeartStart FR3 Manual De Instrucciones página 10

2. Then press the open end of the Pads Sentry down
APPLICATION
After installing the Pads Sentry in the bottom case
insert, use the Pads Sentry as follows:
1. Open a package of HeartStart SMART Pads III.
2. Remove the pads from the
* Peeling any part of the pads from the liner breaks the
2
into the back of the compartment until it clicks
into place.
2
1
package, but do not peel
the pads from the liner
until the pads are needed for
use in an emergency.* You
may leave the paper wrap
on the coiled cable; it will
tear off when the cable is extended to use the
pads.
protective seal and will cause the pads adhesive to dry
out.