Renault Radio CD Bluetooth Manual De Instrucciones página 25

PAIRING AND UNPAIRING A TELEPHONE
"Make the radio visible" method
This method allows you to search from
your phone to the audio system.
– Press button 10;
– select "Make the radio visible" using
the buttons 4 or the control knob 16
on the steering column control, then
press 5 or 17 to confirm;
– a message appears on the audio
system screen and a sixty-second
countdown begins;
– search on your telephone for the
"MY CAR" audio system, then select
it;
– a message is displayed on your te-
lephone and allows you to confirm
the pairing request.
Your phone may ask for authorisation to
share your contacts and call logs.
The message "MyCAR connected" ap-
pears on your phone indicating that
your audio system is paired and con-
nected to your phone.
(2/3)
If the pairing fails, the system screen
goes back to the initial menu.
If the memory of the hands-free tele-
phone system is full, you must unpair
an existing phone before a new phone
can be paired.
"Pair a phone" method
This method allows you to search from
the audio system to the phone. To pair
a phone using this method, perform the
following steps:
– press button 10;
– select "Pair a phone" using the but-
tons 4 or the control knob 16 on the
steering column control, then press 5
or 17 to confirm.
The search for Bluetooth® devices in
the vicinity begins (this search can take
up to sixty seconds.)
Select the telephone that you wish to
pair to audio system using the but-
tons 4 or the control knob 16 on the
steering column control, then press 5
or 17 to confirm.
Depending on the telephone, and if
the audio system requests it, enter
the Bluetooth® code displayed on the
audio system screen in your phone, or
confirm the pairing request.
Your phone may ask for authorisation to
share your contacts and call logs.
Accept sharing to find this information
on the audio system.
Note: the audio system memory is re-
stricted and it is possible that all your
contacts may not be imported from your
phone.
A message on the audio system screen
informs you that the pairing has been
carried out successfully.
The device is automatically saved and
connected to the vehicle.
After sixty seconds, if pairing fails,
repeat these steps.
For safety reasons, carry
out these operations when
the vehicle is stationary.
GB.21