GiBiDi BA24 Instrucciones De Instalación página 35

BA24
Gbd
-
ESC
MENU A: SYSTEM CONFIGURATION AND OPERATING LOGIC SELECTION
KEY + : enters the following menu A1-A2-A3...
KEY - : enters the previous menu A3-A2-A1...
KEY ESC: leaves the menu
KEY OK: enables Y (yes). It activates the function, and automatically disables the complementary function
(example: The activation of A4 = 1 motor automatically disactivates A5 = 2 motors).
Menu Function
A1
FREE
SWING GATE /
A2
OVERHEAD DOOR / BARRIER
A3
SLIDING GATE
A4
1 MOTOR CONFIGURATION
A5
2 MOTORS CONFIGURATION
25
The symbols shown at the beginning reappear.
In this case, the +, - and OK buttons have the following meanings:
+
-
+
OK
OK
Description
State
It configures the system for swing gate, overhead door or barrier.
Y
The activation of this menu automatically disables A3.
It configures the system for a sliding gate.
This configuration automatically excludes:
• gate phase shifts in opening and closing
• hammer stroke
• 2 seconds final opening and closing stroke.
Y
• T3 additional time
NOTE: the limit switches are NOT activated automatically, choose the
It configures the system for one motor.
With this setting, the outputs for the electrical lock 2 can be used for
Y
a 3-minutes timed courtesy light.
The activation of this menu automatically disables A5.
It configures the system for two motors.
Y
The activation of this menu automatically disables A4.
» START
» PEDESTRIAN
» STOP
best configuration with the menu C5
35
UK