6. Remove the ventilation grille which is
fixed by two screws.
7. Carefully put the appliance to its rear
side, totally unscrew the adjustable foot
and screw it in the opposite side.
8. Remove the bottom hinge by unscrew-
ing its fixing screws.
9. Using a 12 mm spanner, unscrew the
hinge pin and reassemble it on the op-
posite side of the hinge.
10. Install the lower hinge in the opposite
side, using the screws previously re-
moved.
11. Carefully put the appliance in its work-
ing position and adjust the level of the
appliance by screwing / unscrewing the
adjustable feet at the bottom of the
cabinet using your fingers or a tool.
All manuals and user guides at all-guides.com
12. Slide the hole cover out of the ventila-
tion grille by pushing it in the direction
of the arrow and reassemble it on the
opposite side.
13. Install the ventilation grille, fixing the
screws.
14. Install the lower door.
15. Install the middle hinge (H) in the oppo-
site side.
16. Install the upper door.
17. In your documentation bag you will find
the upper hinge necessary to make the
reversibility. Put the hinge in position
and screw it.
18. Remove the handles and fix them on
the opposite side. Insert the plastic
plugs into the hole left open.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabi-
net.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natural
fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The After
Sales Service specialist will carry out the re-
versibility of the doors at your cost.
electrolux 13