Conceptronic Full HD Media Player CFULLHDMA Manual Del Usuario página 33

ENGLISH
To use the Conceptronic FULL HD Media Player you need to have the following:
D. A Wired (10/100/1000 Mbps) network.
E. One or more computers running Windows 2000, Windows XP or Windows Vista, a network storage
solution with UPnP A/V Server or a USB storage device with media files.
F. A TV set with HDMI, Component (Y, Pb, Pr), S-Video, SCART or Composite input.
It is useful to have a Broadband Internet connection if you want to use streaming services like listening to
a radio station which is broadcasted through the Internet.
Note: The Conceptronic CFULLHDMA is using an UPnP A/V client to play audio and video.
You need to have hardware with UPnP A/V Server functionality, a third party UPnP A/V Server
application or install the provided Conceptronic Media Server software.
(See chapter 9).
Connecting the network cable
To stream your media files from your computer or network storage solution, you need to connect the
CFULLHDMA to your network.
• Connect the supplied network cable to the unit [8] and to your network device (switch, router, etc.)
Connecting the Video Cable(s)
You can connect the CFULLHDMA in 5 different ways to your TV:
- HDMI
- Composite
- SCART (by using the Composite cable & Scart adapter)
- S-Video (by using the Component & S-Video connection cable) **
- Component (by using the Component & S-Video connection cable) **
** When using S-Video or Component, only the video signal is send to your TV.
For the audio signal, use the Audio RCA Jacks on the Composite cable (Red, White), or the Coaxial
S/PDIF cable.
5. Connecting your CFULLHDMA
2 3 4 5
33
6 7 8 10