Conceptronic Full HD Media Player CFULLHDMA Manual Del Usuario página 35

ENGLISH
Connecting the Power Adapter
When the unit is connected to your Audio/Video equipment, you can connect the power adapter to the
unit.
•
Connect the included power supply to the unit [10] and to a free wall socket.
The power LED of the unit will turn RED, indicating that the unit is in stand-by mode.
Preparing the Remote Control
The remote control is using 2x AAA batteries (provided with the package).
You need to use the remote control to turn on/off the unit.
Notes: - The best operational range of the remote control is about 5 meters.
- Point the remote control to the IR receiver which is embedded in the front panel of the
unit.
- The receiving angle of the IR receiver is ±30 degrees.
- Change the batteries (2x AAA) when they are weak or empty.
35