Care And Maintenance - Roadstar CLR-2855 Manual De Instrucciones

SNOOZE FUNCTION
When the alarm sounds, pressing the SNOOZE Button (1) will temporary
stop about 8 minutes then the alarm sounds again.
SLEEP FUNCTION
1. This function enables you to go to sleep listening to the Radio.
2. Press the ON/OFF/AUTO button to switch ON the Radio.
3. Press the SLEEP Button (5) sequentially. The clock display will show
10/20/30/45/60/90/120 minutes. The Radio turns on and will turn off
automatically after the selected sleep timer.
4. To turn off the Radio at any time during the Sleep period, press the
Clock Button (1) three seconds.
IMPORTANT: When the unit finish the Sleep time, the display switch OFF.
DISPLAY ON / OFF
Keep pressed the ON/OFF/AUTO (7) button until the display will switchOFF.
Press again the ON/OFF/AUTO (7) button to light UP again the display.

CARE AND MAINTENANCE

To prevent fire or shock hazard, do not allow this clock radio to be exposed
to rain or moisture.
This clock radio should not be exposed to direct sunlight, very high or low
temperature, moisture, vibration, or placed in a dusty environment.
English 5 6
Do not use abrasives, benzine, thinners, or other solvents to clean the
surfaces of the clock radio. To clean it, wipe with a mild non-abrasive
defergent solution on a clean soft cloth.
Never attempt to insert wires, pins, or other objects into the venlilation holes
or openings on the clock radio.
Note: When setting the Clock or Alarm times remember that this clock radio
AC POWER
For your own safety read following instructions carefully before attempting
to connect this clock radio to the mains.
This unit is designed to operate on a 230V~50Hz supply only. Connecting
it to other power sources may damage it.
Ensure that supply corresponds to the information on the rating label on the
bottom of the unit.
SPECIFICATIONS
FM Band:
Power Supply:
Power Consumption:
Design and specifications are subject to change without notice.
English
has a 24 Hour clock mode.
87.5 to 108 MHz
230VAC, 50 Hz
3W