English; Important; Connecting Accessories - Philips City line reach & clean HR8378/07 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44

ENGLISH

4

Important

Only use Philips s-bag` double-layer paper dustbags (FC 8021) or
Philips Sydney+ double-layer paper dustbags (type HR 6999).
Check if the dustbag has been placed correctly.
Never use the vacuum cleaner to suck up water or any other
liquid. Never pick up ashes until they are cold.
When the vacuum cleaner is used to suck up fine dust, the pores
of the dustbag may become clogged, causing the passage of air
through the dustbag to become obstructed.As a result, the
dustbag-full indicator will indicate that the dustbag needs to be
replaced, even though the dustbag is not full at all.
Never use the appliance without the Motor Protection Filter.This
could damage the motor and shorten the life of the appliance.
The infrared remote control on the handgrip contains electronic
components (specific types only).
To avoid defects, never clean this part with water.

Connecting accessories

C
To connect the hose to the appliance, push it into the appliance
and turn it clockwise.
To disconnect the hose from the appliance, turn it anticlockwise and
pull it out of the appliance.
Button coupling or Active coupling (specific types only)
C
1
Connect the tube to the handgrip by pressing the spring-
loaded lock button on the handgrip and inserting the handgrip
into the tube. Fit the spring-loaded lock button into the
opening in the tube ("click").
To disconnect the tube from the handgrip, press the spring-loaded
lock button and pull the handgrip out of the tube.
Use the same method to connect and disconnect the other
accessories.
Telescopic tube
C
Adjust the tube to the length you find most comfortable during
vacuum cleaning.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

City line infrared remote control hr8378/07

Tabla de contenido