Philips City line reach & clean HR8378/07 Manual De Instrucciones página 8

ENGLISH
8
C
3 By pushing the - button, you will reduce the suction power by
one setting.
C
4 By pushing the + button, you will increase the suction power
by one setting.
C
5 Push the standby button to temporarily switch the vacuum
cleaner off, for instance when you have to move some
furniture.
6 To continue vacuum cleaning, simply press the - button or the
+ button.The appliance will start operating at the previously
selected suction power setting again.
Storage
1 Switch the appliance off.
2 Remove the mains plug from the wall socket.
C
3 Rewind the mains cord by pressing the cord rewind button.
C
4 Put the appliance in upright position and attach the lower tube
to the appliance by means of the clip.
The height of the clip can be adjusted by sliding it along the tube.