NEO PROTON 6 QUAD USB Manual De Usuario página 17

MASTER/SLAVE OPERATION (via UFI
wi- transceiver)
PROTON 6 QUAD USB units can operate in Master/Slave
mode wirelessly using the optional UFI wi- transceiver. The
master UFI-enabled unit can be operated in stand-alone
mode, with the UFI set to transmit. The slave units should
all be set to slave mode, with the UFI set to receive.
Note: Slave units should be configured before configuring
master unit
Note: All units should be set to same DMX address, mode
and UFI channel
SLAVE UNITS:
•
Press MENU button until 4-CH or 9-CH is dis
played. Press ENTER
•
Set DMX address to d 1
•
Set UFI to preferred receiving channel (1-16)
•
Attach UFI to the PROTON 6 QUAD USB'S port.
MASTER UNIT:
•
Press MENU button until DMX mode is displayed
that matches slave configuration Press ENTER
•
Set DMX address to d 1
•
Set to Auto or Sound-Active mode
•
Set UFI to chosen transmitting channel (1-16)
•
Attach UFI to the PROTON 6 QUAD USB port
OPERATING MODE PRIORITY RANK
Higher priority control modes override lower priority modes
1. UFI
2. DMX (wired)
3. Infrared (IR6 remote)
4. Manual (onboard menu)
P. 17
PROTON 6 QUAD USB
ENGLISH VERSION