NEO PROTON 6 QUAD USB Manual De Usuario página 7

4. INTRODUCTION
MOUNTING
PROTON 6 QUAD USB may be set up on a solid and even
surface. The unit can also be mounted upside down to a
cross arm. For fixing, stable mounting clips are required.
The mounting place must be of sufficient stability and be
able to support a weight of 10 times of the unit's weight.
When carrying out any installation, always comply scrupulous-
ly with all the regulations (particularly regarding safety) cur-
rently in force in the country in which the fixture's being used.
• Install the projector at a suitable location by means of the
mounting bracket (1).
• Always additionally secure the projector with the safety
rope from falling down. For this purpose, fas-
ten the safety rope at a suitable position so that the maxi-
mum fall of the projector will be 20 cm.
• Adjust the projector and use the knob (2) to slightly re-
lease or tighten the locking mechanism of the
6CH - 11CH ), then press the button ENTER.
bracket if is necessary.
P. 7
PROTON 6 QUAD USB
ENGLISH VERSION