Sound Settings; Volume Distribution (Fader/Balance); Equalizer; External Audio/Video Sources - Blaupunkt San Pedro 950 Manual De Instrucciones

Sound settings

Volume distribution (fader/balance)

You can adjust the volume distribution in the
vehicle for all sources.
On the control bar of the current audio
source, press the[
The equalizer menu is displayed.
Press the [ ] button.
The menu for fader and balance is displayed.
Adjust fader and balance with [ ]/[ ]or
[ ]/[ ].
Next, press [ Back ] . The setting is stored, the
current source is displayed again.

Equalizer

You can adjust the equalizer for all media sources.
On the control bar of the current audio source,
press the [ ] button.
The equalizer menu is displayed.
Select a preset equalizer via the buttons.
- Or -
Press the [ User ] button to adjust the level of
the available frequency bands according to
your preferences.
Note:
With the [ Reset ] button, you can reset the
customized setting again.
- Or -
Press the [ Flat ] button for a linear sound
playback.
Press the [ Loudness ] button to switch
increasing the bass at low volume on or off .
Next, press [ Back ] . The setting is stored, the
current source is displayed again.
] button.
Sound settings External audio/video sources

External audio/video sources

The device features an external AV/AUX input for
audio and video playback:
∙
AUX-In is implemented at the very same USB
socket.
Danger!
Increased risk of injury from connector.
In case of an accident, the protruding connector in
the AV-IN/AUX socket may cause injuries. The use
of straight plugs or adapters leads to an increased
risk of injury.
AVIN: Start the AVIN mode with the button in
applications menu.
The display shows the audio or video playback of
the auxiliary AV device.
AUX: If a auxiliary audio device is connected, the
playback starts. And the AUX icon appears on the
applications menu.
DE
UT
SC
H
13