GE 27730 Manual De Instrucciones página 41

T
ELEPHONE
Problem
No dial tone
Dial tone is OK, but
can't dial out
Handset does not ring
Solution
• Check installation:
— Is the base power cord connected to a working
outlet?
— Is the telephone line cord connected to the
base unit and the wall jack?
• Disconnect the base from the wall jack and connect
another phone to the same jack. If there is no dial tone
in the second phone, the problem might be your
wiring or local service.
• Is the handset out of range of the base?
• Make sure the battery is properly charged (12 hours).
• Is the battery pack installed correctly?
• Did the handset beep when you pressed the TALK
button? Did the IN USE indicator come on? The
battery may need to be charged.
• Make sure the tone/pulse setting is programmed
correctly.
• Make sure the ring volume setting is set to 1 or above.
• You may have too many extension phones on your
line. Try unplugging some phones.
• See solutions for "No dial tone."
41