Desktop Installation - GE 27730 Manual De Instrucciones

D I
ESKTOP NSTALLATION
NOTE: For desktop charging
only, the handset is able to
charge facing up or down.
1. Make sure mounting bracket is securely fastened.
2. Place the handset in the base.
3. Plug the power supply cord into the base and then into an AC outlet.
The CHARGE indicator comes on indicating that the battery is charging.
Allow the phone to charge for 12 hours before using the first
time. If you don't charge the phone properly (for 12 hours)
when you first set up the phone, perfomance of the battery will
be compromised.
4. After charging, connect the telephone cord to the phone and then to the
wall jack.
NOTE : The phone automatically defaults to touch-tone dialing. To change to
pulse (rotary) dialing, see "Tone/Pulse Dialing." If you don't know which type
of service you have, check with the phone company.
CAUTION: Use only the Thomson 5-2470 power supply that came with this unit.
Using other power supplies may damage the unit.
3
4
2
1
7