Wilo Medana CH1-LC Serie Instrucciones De Instalación Y Funcionamiento página 119

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 66
We, the manufacturer, declare under our sole responsability that the pump types of the series,
Als Hersteller erklären wir unter unserer alleinigen Verantwortung, da die Pumpenbauarten der Baureihen,
Nous, fabricant, déclarons sous notre seule responsabilité que les types de pompes des séries,
MEDANA CH1-
LC.02/04/06/10... (FIRST H)
In their delivered state comply with the following relevant directives:
in der gelieferten Ausführung folgenden einschlägigen Bestimmungen entsprechen:
dans leur état de livraison sont conformes aux dispositions des directives suivantes :
_ Machinery 2006/42/EC
_ Maschinenrichtlinie 2006/42/EG
_ Machines 2006/42/CE
and according to the annex 1, §1.5.1, comply with the safety objectives of the Low Voltage Directive 2014/35/EU
und gemäss Anhang 1, §1.5.1, werden die Schutzziele der Niederspannungsrichtlinie 2014/35/EU eingehalten
et, suivant l'annexe 1, §1.5.1, respectent les objectifs de sécurité de la Directive Basse Tension 2014/35/UE
_ Energy-related products 2009/125/EC
_ Energieverbrauchsrelevanter Produkte - Richtlinie 2009/125/EG
_ Produits liés à l'énergie 2009/125/CE
and according to the amended regulation 640/2009 on induction electric motors
und entsprechend der geänderten Verordnung 640/2009 über Induktionsmotoren
et conformément au règlement 640/2009 amendé relatif aux moteurs électriques à induction
_ Restriction of the use of certain hazardous substances 2011/65/EU + 2015/863
_ Beschränkung der Verwendung bestimmter gefährlicher Stoffe-Richtlinie 2011/65/EU + 2015/863
_ Limitation de l'utilisation de certaines substances dangereuses 2011/65/UE + 2015/863
and with the relevant national legislation,
und entsprechender nationaler Gesetzgebung,
et aux législations nationales les transposant,
comply also with the following relevant harmonised European standards:
sowie auch den Bestimmungen zu folgenden harmonisierten europäischen Normen:
sont également conformes aux dispositions des normes européennes harmonisées suivantes :
EN 809+A1
EN 60034-30-1
Person authorized to compile the technical file is:
Bevollmächtigter für die Zusammenstellung der technischen Unterlagen ist:
Personne autorisée à constituer le dossier technique est :
Dortmund,
H. HERCHENHEIN
Senior Vice President - Group Quality
N°2195366.01 (CE-A-S n°4236149)
EU/EC DECLARATION OF CONFORMITY
EU/EG KONFORMITÄTSERKLÄRUNG
DECLARATION DE CONFORMITE UE/CE
(The serial number is marked on the product site plate according to the Machinery Directive
Annex I: §1.7.4.2, b) & c) and §1.7.3. / Die Seriennummer ist auf dem Typenschild des
Produkts gemäß der Maschinenrichtlinie Anhang I angegeben: §1.7.4.2, b) & c) und §1.7.3. /
Le numéro de série est indiqué sur la plaque signalétique du produit conformément à la
directive «Machines», annexe I: §1.7.4.2, b) et c) et § 1.7.3.)
EN 60034-1
EN IEC 63000
Digital unterschrieben
von Holger Herchenhein
Datum: 2019.06.07
08:00:51 +02'00'
EN 60204-1
Group Quality
WILO SE
Nortkirchenstra e 100
D-44263 Dortmund
WILO SE
Nortkirchenstra e 100
44263 Dortmund - Germany

Publicidad

Tabla de contenido
loading

Tabla de contenido