PEERLESS SP730P Manual De Instrucciones página 7

Route cords through center of cord management clip (B). Next, attach cord management clip (B) to adapter plate
4
using M4 screw (F or G) as shown in detail 1. Tighten all four screws (F or G).
Note: An additional cord management clip (B) was added for additional cords. If you want to use this additional clip,
remove the opposite bottom screw and repeat this step on opposite side of adapter plate.
detail 1
B
F or G
7 of 24
ISSUED: 06-10-05 SHEET #: 095-9225-8 09-25-06