Storing Your Own Sound Adjustments; To Reset To The Factory Settings - JVC KS-FX230 Manual De Instrucciones

Storing your own sound adjustments

You can adjust the sound modes (BEAT, SOFT, POP: see page 11) as you like and store your
own adjustments in memory.
1
SOUND
Within
5 seconds
2
SEL
LOUD
Within
5 seconds
3
Within
5 seconds
4
SOUND
5
Repeat the same procedure to store other settings.

To reset to the factory settings

Repeat the same procedure and reassign the preset values listed in the table on page 11.
2 3
Call up the sound mode you want to adjust.
See page 11 for details.
To adjust the bass or treble sound level
Select "BAS" or "TRE."
To turn on or off the loudness function
Each time you press LOUD, the loudness function turns on
and off alternatively. (= go to step 4)
Adjust the bass or treble level.
See page 12 for details.
Press and hold SOUND until the sound mode
you have selected in step 1 flashes on the
display.
Your setting is stored in memory.
1, 4 2
13