W M; All Ounting The; Telephone Setup; Programmable Functions - GE 21011 Manual De Instrucciones

W M
ALL OUNTING THE
NOTE: For best results, leave the phone on a flat surface during initial
charging before you hang the phone on the wall.
1. Turn the base over.
2. Attach the wall mounting pedestal by first inserting the tabs on the open
edge of the pedestal into the slots on the lower portion of the bottom of
the base. Then push down and snap the pedestal into place.
3. Slip the mounting holes (on the back of the pedestal) over the wall plate
posts and slide the unit down into place. (Wall plate not included.)
T
ELEPHONE
P
ROGRAMMABLE
This system uses a menu structure and soft key function buttons to give
you access to all of the built-in features.
U S

SING THE

OFT
There are three buttons under the display box which represent several soft
key (programmable) functions. Use the buttons to activate the soft key
icons that appear in the display box. You may program the following items
with the soft keys: Language, Display Contrast, Area Code, Ringer Tone,
Time, Tone/Pulse, Registration, Deregistration, Walkie-Talkie, and Default
Setting.
L
ANGUAGE
This setting may be made with the handset or the base.
Make sure your phone is OFF (not in TALK mode).
1. Press the MENU soft key to go to the main menu.
B
ASE
S
ETUP
F
UNCTIONS
K
EYS

LANGUAGE

AREA CODE
OK EXIT
11