Dialing A Stored Number Handset; Base - GE 21011 Manual De Instrucciones

NOTE: If you don't want to change or delete a number, simply press EXIT
soft key, or wait for one minute to exit the review mode.
D S
IALING A TORED
H
ANDSET
Make sure the phone is ON by pressing the talk/callback button.
1. Press the DIR soft key.
2. Enter the memory location number (01-50) for the desired memory
location. The number will be dialed automatically.
1. Make sure the phone is OFF (not in TALK mode).
2. Press the DIR soft key.
3. Press the number key (01-50) for the desired memory location or use the
cid/vol (up or down arrow) button to scroll through memory until the
desired number displays.
4. Press the talk/callback button. The number dials automatically.
B
ASE
Make sure the phone is ON by pressing the pressing the speaker/callback
button.
1. Press the DIR soft key.
2. Press the number key (01-50) for the desired memory location. The
number dials automatically.
Make sure the phone is OFF (not in talk mode)
1. Press the DIR soft key.
2. Press the number key (01-50) for the desired memory location, or use
the CID (up or down arrow) button to scroll through memory until the
desired number displays.
3. Press the speaker/callback button. The number dials automatically.
42
N
UMBER
-OR-
-OR-