Onnecting The Ac; Connecting The Telephone Line; Installing The Phone - GE 21011 Manual De Instrucciones

I
NSTALLING THE
Choose the best location to install your base and handset charge cradle.
Your base and handset charge cradle should be placed on a level surface
such as a desk or table top, or you may mount the base on a wall.
C
ONNECTING THE
1. Plug the power supply cord into the power jack on the back of the
base and the other end into an electrical outlet. When the handset is
placed on the cradle the charge indicator turns on to indicate the
battery is charging.
2. Plug the handset charge cradle into an electrical outlet.
CAUTION: Use only the ATLINKS USA, Inc. power supply 5-2562 that
came with this unit. Using other power supplies may damage the unit.
Allow the system to charge for 12 hours prior to first use. If you don't
properly charge the phone, battery performance is compromised.
C
ONNECTING THE
On the base, plug the one end of the telephone line cord into the jack on
the back of the base and the other end into a modular phone jack.
10
P
HONE
AC (E
LECTRICAL
T L
ELEPHONE INE
) P
OWER
charge