Area Code - GE 21011 Manual De Instrucciones

A C
REA ODE
Make sure your handset or base is at the main mode. If you enter a 3-digit
area code in the area code menu, your local area code will not appear in
Caller ID messages you receive. Instead, you will see only the local seven
digit number. Calls you receive from outside your local area code will
show the full ten-digit number.
This setting may be made with the handset or the base. Make sure your
phone is OFF (not in TALK mode).
1. Press the cid/vol (up or down arrow) button on the handset or the CID
(up and down arrow) button on the base to scroll to AREA CODE .
LANGUAGE

AREA CODE

OK
HANDSET DISPLAY
2. Press the OK soft key and SET AREA CODE - - - shows in the display. - - -
is the default setting.
3. Use the touch tone pad on your base or handset to enter your three digit
area code.
4. Press the OK soft key to save your selection and return to the main
menu. The selected area code displays for two seconds.
NOTE: Press the EXIT soft key to keep the previous setting and return to the
main menu screen.
14
EXIT
SET AREA CODE
- - -
OK
AREA CODE - 317
AREA CODE
RINGER TONE
OK
BASE DISPLAY
EXIT
EXIT