Memory; Storing A Name And Number In Memory - GE 21015 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Either sending or receiving party may press the format/conference
button to start the 3-way conference.
NOTE: Press the EXIT button on either handset to cancel the intercom call
and let the sending party continue to talk to the external party. Or the calling
party may press the talk/callback button to transfer the call to the receiving
party who may speak to the external caller independently.
NOTE: A handset or the base can enter conference directly by pressing talk/
callback on the handset or speaker/callback on the base while the other
handset or the base is on an external call.
M
EMORY
The handset and base each have their own separate memory dialing
storage areas. Fifty 15-character names and up to 20 digit telephone
numbers can be stored in the handset memory. Fifty 15-character names
and up to 20 digit telephone numbers can be stored in the base memory.
S
N
TORING A
AME AND
1. Make sure the phone is OFF (not in talk mode).
2. Press the mem button.
3. Press the desired memory location button (01 through 50), or use the
button on handset or the base to select the memory location. If the
memory location is occupied, the memory location and stored name and
number appear in the display. If the memory location is empty, EMPTY
shows in the display.
30
N
M
UMBER IN
EMORY
SELECT MEMORY
01-50
* * EMPTY * *
- -
MEMO
0 3
MEMO
or

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido