Flash /Call Waiting; Last Number Redial - GE 21015 Manual De Instrucciones

3. Press the program/mute button to save. The ringer volume setting
shows in the display for two seconds, then returns to standby mode.
F /C W
LASH ALL
If you subscribe to the combined Call Waiting Caller ID service from your local
telephone company, you will receive Caller ID information (if available) on Call
Waiting calls. During a phone call you will hear a beep, which indicates
another call is waiting on the line, and Caller ID information shows in the
handset display. To connect to the waiting call, press the flash button on the
handset and your original call is put on hold. You may switch back and forth
between the two calls by pressing the flash button.
TIP: Don't press the talk/callback button on the handset or the speaker/
callback button on the base to activate a custom calling service, such as call
waiting, or you'll hang up the phone.
L N
AST UMBER
To quickly redial the last number you dialed:
1. Press the talk/callback button on the handset or the speaker/callback
button on the base.
2. Press the redial button.
-OR-
3. Press the redial button first then press the talk/callback button or the
speaker/callback button.
RINGER HIGH
1 HI 2 LOW 3 OFF
OK
RINGER LOW
AITING
R
EDIAL
EXIT
23