TEFAL ULTIMATE AUTOCLEAN Manual Del Usuario página 12

Ocultar thumbs Ver también para ULTIMATE AUTOCLEAN:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
• Warning! Use of an abrasive cloth will damage the self-cleaning
coating on the soleplate.
• Its exclusive active coating eliminates all impurities that can be
generated under normal conditions of use.
• Ironing with an incorrect program can however leave traces that may
require manual cleaning. In this case, it is recommended that you use a
soft damp cloth on the still warm soleplate so as not to damage the
coating .
Your steam iron is fitted with an Ultraglide soleplate (depending on model):
• Never use aggressive or abrasive products.
• When the soleplate is still warm, wipe with a damp cloth
- Unplug the iron and wait for the soleplate to cool down.
- Empty the water tank and set the steam control to DRY
- Wind the cord not too tightly around the heel at the back of the iron.
- Store the iron on its heel.
Environment
i Your appliance contains valuable materials which can be recovered or recycled.
‹ Leave it at a local civic waste collection point.
If there is a problem?
Problem
• Water drips from the
holes in the soleplate.
• Brown streaks come
through the holes in
the soleplate and
stain the linen.
• The soleplate is dirty
or brown and can
stain the linen.
• There is little or no
steam.
• The soleplate is
scratched or
damaged.
• Water is leaking out
through the water
tank cover.
• Steam or water come
from the iron as you
finish filling the tank.
• The spray and/or shot
of steam do not work.
• Water leaks out of the
front of the iron.
Name of manufacturer : CALOR S.A.S
220-240V a.c. 2010-2400W
220-240 V a.c. 2185-2600W
Made in France
Environment protection first !
Possible causes
• You are using the Shot of Steam button too often.
• You have stored the iron horizontally, without
emptying it and without setting it to DRY.
• You are using chemical descaling agents.
• You are using pure distilled/demineralised or
softened water.
• Your linen is not rinsed sufficiently or you have
ironed a new garment before washing it.
• You have ironed with an unsuitable
programme (temperature too high).
• You are using starch.
• The water tank is empty.
• The anti-calc valve is dirty.
• Your iron has a build-up of scale.
• Your iron has been used dry for too long.
• You have placed your iron flat on a metallic
rest-plate or ironed over a zip.
• You have cleaned your soleplate with an
abrasive or metal pad.
• You have not closed the water tank cover
properly.
• The steam control is not set to the DRY
position
.
• The water is empty.
• You have exceeded the level MAX when filling
the water tank.
3.12 104
50/60Hz
Note! The steam control position must
necessarily be on STEAM
remove or replace the iron's antiscale rod.
Attention! The use of a scouring pad will cause
damage to your soleplate's self-cleaning
coating (fig.17)
- fig. 1.1
. A little water may remain in the tank.
Solutions
• Wait a few seconds between each use
of the button.
• See the section "Storing your iron".
• Do not add any descaling agents to
the water in the water tank.
• See section "Types of water not to use?".
• See section "Cleaning the soleplate".
• Ensure linen is rinsed thoroughly to
remove any soap deposits or
chemicals on new garments which
may be sucked up by the iron.
• Select the appropriate program.
Refer to the chapter "Clean the
soleplate"
• Spray starch on the underside of the
fabric to be ironed.
• Fill it.
• Clean the anti-calc valve.
• Clean the anti-calc valve and carry out
a self-clean.
• Carry out a self-clean.
• Wait for the soleplate to reach the
correct temperature.
• Always set your iron on its heel.
• Try to avoid ironing over zips.
• Refer to the chapter "Clean the
soleplate".
• Make sure the water tank cover has
clicked shut.
• Check that the steam control is
set to the DRY position
• Fill the water.
• Empty the surplus water out of the
water tank.
If you have any problem or queries, please contact our Customer Relations
team first for expert help and advice.
845 602 1454 - UK / (01) 677 4003 - Ireland
or consult our website - www.tefal.co.uk
9
(fig.1.2) in order to
Storing your iron
.
DE
EN
FR
NL
IT
ES
PT
DA
NO
SV
FI
EL
CS
HU
SK
HR
SL
RO
SR
BG
PL
TR
RU
UK
ET
LV
LT

Publicidad

Tabla de contenido
loading

Tabla de contenido