Vortice VORT HR 300 NETI Manual De Instrucciones página 43

ENGLISH
Pre-alarm: "Check filters"
After the pre-set amount of time has passed, "Alarm!" appears on the "HOME" page and the following note appears on the
"Alarms" page: "Check clean filters". To replace filters, follow the instructions contained in the paragraph on "Maintenance
and Cleaning". Press the [] key and the following will appear:
Alarms
Filters
Alarm: "Filters to be replace"
After the pre-set amount of time has passed, "Alarm!" appears on the "HOME" page and the following note appears on the
"Alarms" page: "Replace reset". To replace filters, follow the instructions contained in the paragraph on "Maintenance and
Cleaning". Press the [] key and the following will appear:
Alarms
Filters
NOTE With filter timer reset (See: Operation and Use: "Installer Menu Page", "Reset F.") the counter will also be reset.
Alarm: No Frost - Wait one hour
The device is provided with temperature probes which measure air temperature.
If temperatures are too low, "No Frost", "Alarm!" "Block!" appear on the "HOME" page and the following note appears on
the "Alarms" page: "Antifreeze Wait 1 hour". Press the [] key and the following will appear:
Alarms
No Frost
Filters
Verify
clean
Filters
Filters
Change
ge
reset
No Frost
Wait
1 Hour
YES
[ ▲ ]
[ ] ]
[ ]
[ ▲ ]
NO
YES
[ ▲ ]
[ ] [ ] ]
[ ▲ ]
NO
YES
[ ▲ ]
[ ] ]
[ ]
[ ▲ ]
NO
43