Cameo CLMPAR3 Manual De Usuario página 12

OPERATION:
The effect speed and stroboscope frequency can each be
adjusted separately for programs 02 – 18. Press ENTER
repeatedly until the cursor appears in the top line of
the display and then use the UP and DOWN buttons to
select the desired program 02 – 18. Press ENTER again
to confirm the change and move the cursor to the field
"Speedxx" in the bottom line. Now the effect speed can
be set using the UP and DOWN buttons. "00" stands for
the slowest and "99" for the fastest speed.
Pressing the ENTER button again confirms the input
and moves the cursor to the "Flashxx" field. Now the
stroboscope effect can be set as desired using the UP and
DOWN buttons. "Flash00" stands for stroboscope effect
deactivated, "Flash01" for the slowest and "Flash99" for
the fastest flash frequency. Once the desired stroboscope
effect has been set, press ENTER to confirm the input.
AUTO RUN
In AUTO RUN mode, various colour change, colour fade,
and meteor programmes run in succession.
Press the MODE button repeatedly until "AUTO RUN"
appears in the display. To set the sequential speed of the
individual programs, press ENTER. The cursor appears
in the "FQN:xx" field in the bottom line. Use the UP and
DOWN buttons to set the speed at which the individual
programmes follow one another to the desired value.
"FQN:01" stands for the fastest sequence, "FQN:99" for
the fastest sequence of the programs. Press ENTER to
confirm the input.
12