Slave Mode - Cameo CLMPAR3 Manual De Usuario

OPERATION:

SLAVE MODE

If you want to control the LED multi-PAR lighting system
either using the optional foot switch (CLMPARFOOT2) or
have it controlled by a second CLMPAR3 (master) in one
of the stand-alone modes, the "SLAVE MODE" must be
selected. Press the MODE button repeatedly until "SLAVE
MODE" appears in the display. The connection between
the master and slave unit is made using a DMX cable,
whereby the DMX output of the master unit must be
connected to the DMX input of the slave unit.
Note: The illumination of the LC display switches off auto-
matically after approx. 1 minute of inactivity. Pressing any
one of the 4 control buttons will turn on the illumination of
the LC display again.
16